Key Features
- 4.3-inch colour touchscreen interface
- Remote monitoring via desktop or smartphone
- Supports 250 devices per loop, 64 panels networked
- Built-in TCP/IP output and dual sounder circuits
- EN54-2 and EN54-4 compliant design
Overview
The SmartConnect Addressable Fire Alarm Panel is a fully featured single-loop addressable control panel designed for reliable fire protection and easy operation. It features a 4.3-inch colour touchscreen display with intuitive navigation and supports remote monitoring through a desktop PC or smartphone via the cloud.
The panel supports up to 250 devices per loop and can network with up to 64 panels peer-to-peer without additional network cards. It includes two programmable local inputs, two sounder circuits, and both fire and fault relays. The system allows full cause-and-effect programming through the front panel or PC configuration software.
Housed in a flame-retardant ABS enclosure, the SmartConnect offers built-in TCP/IP connectivity, day/night mode programming, and up to eight password-protected user levels. It meets EN54 Parts 2 and 4 standards and includes space for two 7Ah sealed lead-acid batteries.
Turntable
Approvals
Tech Specs
| Mains Voltage | 230V AC +10% / -15% @ 50/60 Hz |
| System Voltage | 24V DC (Nominal) |
| Loop Current | 500mA |
| Sounder Alarm Output | 2 x 200mA @ 24V DC |
| Fault Relay | 1 x Volt Free Relay, SELV @ 1A Max |
| Loop Capacity | 250 MKII Devices |
| Charger Voltage | 27.6V |
| Battery Cut Off | Battery Voltage Less Than 20V |
| Battery Internal Resistance limit | 2.0 ohm |
| Enclosure Size (W x D x H) | 370 x 311 x 113mm |
| Weight | 3.5 kg |
| Maximum Battery Space | 2 x 7.0 Ah, 12 V DC Sealed Lead Acid |
| IP Rating | IP30 |